Only in recent years has the age old concept of health care through steam bathing been made possible in the privacy of one’s own home‚ hotel room or cottage.
Besides the exhilarating effects of temperature and temperature changes‚ the steam moisens the respiratory tract and cleanses the skin. Especially in dry climates where good humidification is hard to find‚ your morning Alladin Air steam bath will give you that head start you need to face the day.
Steam Generator Selection
To select the proper size of steam generator‚ calculate the cubic footage in the following manner:
1. Depth X Width X Height = Cubic Footage. Do not deduct for seating.
2. Adjustments to cubic footage calculation for wall and ceiling material:
Acrylic or Fiberglass No Adjustment
Ceramic tile‚ Cultured marble +100%
Glass or Glass block wall +30%
Natural Stone (marble‚ onyx‚ slate‚ etc.) +100%
Steam lines over 20ft. (insulate heavily) +25%
Cast Iron Tub +25%
Exterior walls subject to freezing +50%
3. Use the unit selection guide below and select your required KW capacity based
on your previous calculations from step 2.
| Unit Selection Guide | ||||||||||
| Required Capacity KW | 1.5 | 2.0 | 3.0 | 4.0 | 5.0 | 6.0 | 7.0 | 8.0 | 9.0 | 10.0 |
| Max. Room Volume Cubic Feet | 60 | 80 | 100 | 140 | 180 | 220 | 250 | 300 | 350 | 400 |
Each steam room is unique. The above information is a recommendation only. Because of variables in construction‚ these sizing instructions should be considered guidelines only. Your distributor or Alladin–Air will review the model selected provided we receive complete information including construction details.
4. Select your appropriate unit from the capacity table by matching the Input
Capacity & Required Capacity from step 3.
| Series SFL Capacity Table | ||||||||
| Input KW | Model Number | Capacity | Amps - 1 PH-60 Cy. | |||||
| 115 Volt | 208 Volt | 230 Volt | lbs/hr | kgs/hr | 115V | 208V | 230V | |
| 1.5 | SFL-IX5MI | 4.5 | 2.1 | 13.0 | ||||
| 2.0 | SFL-2MI | SFL-2M8 | SFL-2M2 | 6.0 | 2.7 | 17.4 | 9.6 | 8.7 |
| 3.0 | SFL-3M8 | SFL-3M2 | 9.0 | 4.1 | 14.4 | 13.0 | ||
| 4.0 | SFL-4M8 | SFL-4M2 | 12.0 | 5.5 | 19.2 | 17.4 | ||
| 5.0 | SFL-5M8 | SFL-5M2 | 15.0 | 6.8 | 24.0 | 21.7 | ||
| Double Circuited Series | ||||||||
| 6.0 | SFL-2E-3M8 | SFL-2E-3M2 | 18.0 | 8.2 | 28.8 | 26.0 | ||
| 7.0 | SFL-2E-3/4M8 | SFL-2E-3/4M2 | 21.0 | 9.6 | 33.6 | 30.4 | ||
| 8.0 | SFL-2E-4M8 | SFL-2E-4M2 | 24.0 | 11.0 | 38.4 | 34.8 | ||
| 9.0 | SFL-2E-4/5M8 | SFL-2E-4/5M2 | 27.0 | 12.3 | 43.2 | 39.1 | ||
| 10.0 | SFL-2E-5M8 | SFL-2E-5M2 | 30.0 | 13.6 | 48.0 | 43.4 | ||
